RP-Tools Double scissor lift - on floor

All RP-Tools car lifts comply with TÜV Austria's most stringent requirements for safety and quality.

Characteristics

• For cars, trucks and vans.
• Maximum lifting height of 1900 mm.
• 3000kg / 3500kg lifting capacity of the lift for heavy vehicles.
• Hydraulic lifting system with four cylinders for powerful lifting.
• Very low lift with 112 mm minimum height.
• Lockable ramps for extension of the receiving surface.
• Hydraulic safety system when lifting the lift.
• Low requirements for the footprint, floor requirement only 150 mm concrete.

Delivery

• 1 x lift
• 1 x hydraulic unit
• 1 x control unit
• 1 x instruction manual with test book
• 1 x emergency drainage system
• 4 x rubber blocks

Security features

• Emergency lowering system in case of power failure
• Automatic unlocking of the security system
• Air fuse
• Hydraulic shut-off valves
• Acoustic lowering protection
• Synchronization control
• Anti-trap protection to EN standard
• Overload valve
• Lowering safety devices
• Automatic latching safety latches

Technical Specifications

• Fuse protection (A) : 16
• Frequency (Hz) : 50
• Motor capacity (kW) : 2,2 / 2,6
• Color : Blue
• Noise development (dBA) : 70
• Lifting time approx. (s) : 50
• Oil requirement (liter) : 16
• Width working plate (mm) : 600
• Width between working plates (mm) : 800
• Total width (mm) : 2000
• Stroke range (mm) : 1900
• Height min. (mm) : 112
• Length working plate (mm) : 1495 - 2030
• Lowering time ca. (s) 45
• Load capacity (kg) 3000 / 3500KG
• Weight (kg)
  Shipping weight : 890.00 / 1118 kg
  Product weight : 820.00 / 1090 kg
• Product dimensions (mm) :
  Length : 2030
  Width : 2000