• On sale!
  • -€250.00

Hauvrex HTL2640.Pro - 2 post lift full automatic - 4000kg - 220V

€3,100.00
€2,850.00 Save €250.00

The Hauvrex HTL2640.Pro is a full automatic two post lift with base and automatic solenoid lock release with 24V full automatic control for daily professional use. The lift with a maximum capacity of 4000kg has 4 arms in 3 sections with 85 min. height for maximum flexibility. Installation and aftersales service on the spot possible within a range of 150kms from Brussels.

Installation
Quantity

 

Beveiligingsbeleid (bewerken met de module Klanten geruststellen)

 

Leveringsbeleid (bewerken met de module Klanten geruststellen)

 

Retourbeleid (bewerken met de module Klanten geruststellen)

Main characteristics:

  • Standard aluminium motor avoid overheating and ensures long service life
  • Eelectric release of security locks : just press Up and Down button to operate the lift
  • Metal bar connection on cylinder head to avoid the chain to get out
  • Standard door protection pads to prevent possible damage to the door opened without caution
  • The arm locks engage and disengage automatically
  • 80mm and 150mm lift pad height adaptors
  • Adjustable screws up lifting pads with clearance height less than 100mm
  • Cable pulley with bearing prevents wearing of pulley pin 

The following safety devices have been installed to protect against overweight conditions and equipment failure:

  • The thermal relay in the electric box will trip if the motor is overloaded
  • The maximum pressure valve (Fig. 11), located on the hydraulic oil power unit, will trip if the lift is overloaded.
  • In case of a sudden, great leakage in the hydraulic circuit (a broken pipe), the blocking valves, at the bottom of each Cylinder, will trip.
  • If the lift reaches to the maximum height, the up limit switch will stop the lifting.
  • Keep both cables in balance during raising or lowering
  • If the hydraulic cylinder breaks, the safety wedges will trip, located inside the posts. The wedges are pushed by the spring and immediately stop the carriage preventing their descent.

Specifications :

  • Lifting Capacity : 4000kg
  • Min. Height : 85mm
  • Max. Lifting Height : 1935mm
  • Overall Height : 2826mm
  • Overall Width : 3418mm
  • Width between Posts : 2830mm
  • Lifting Arm Length (Symmetric) : 610~1346mm
  • Lifting/Lowering Time : 55 Sec./45 Sec. (adjustable)
  • Motor Power : 2.2kW
  • Power Supply : 220V/50Hz/1Ph

HTL2640.Pro
5 Items

Data sheet

Operation
Full automatic
Equiped with electronic parts (print boards etc.)
NO
Hefvermogen
4000 kg
Minimum height
85 mm
Maximum lifting height
1935 mm
Total width
3418 mm
Width between posts
2830 mm
Total height
2826 mm
Lifting time
55 sec
Lowering time
45 sec (adjustable)
Motor
Aluminium - 2.2 KW - 13 Amp
Power supply
220V
Voltage control box and parts
24V
CE-certificated
Yes
Guarantee
Yes
Spare parts in stock
Yes, also after guarantee
Liftings arms
3 sections
Length arms
610 - 1346 mm
Height adaptors
80 mm and 150 mm
Drive trough width
2560 mm

Specific References

EAN13
9504852959819

Download

chat Comments (0)
No customer reviews for the moment.